Make sure you have removed any wanted files
on the USB drive to save location as the
USB drive will be formatted in this process
Insert your windows 7 DVD in to the drive and don’t start the
installation process. If you don’t have the windows 7 and have windows 7 image
file then use WinArchiver or PowerISO to mount the image file as virtual CD
ROM.
Before you continue make sure the drive letter of the USB stick and
the drive letter of the windows 7 drive.
Start command
prompt with administrator privilege.
Type DISKPART. This loads the diskpart application
Then type LIST DISK. It wIll show all the disks attached to your computer. Note
the disk number of your USB stick.
Then type SELECT DISK 2 (replace the DISK 2 with
your preferred DISK number
(See the bellow image)
If it is success you will get the message like “Disk 2 is now the selected Disk”
Then type CLEAN
The message will be like bellow
After the drive cleaning process follow the list of commands and check the successful
response from the OS with the bellow imageThen type CLEAN
The message will be like bellow
(See the bellow image for successful results)
Next type ASSIGN (assign drive letter to your USB stick)
And then EXIT (Exit the DiskPart application and come to the normal prompt)
Type D: (Where the D is the drive letter of the windows 7 CD ROM)
Then key CD BOOT
Then BOOTSECT.EXE /NT60 E: (Again the drive letter E is the drive letter assigned to your USB
stick )
(See the bellow image for successful results)
No comments:
Post a Comment